Fast, certified crews for flooded basements and burst pipes
Water extraction Medina WA done right the first time
When a pipe bursts or your basement floods, water extraction Medina WA is the first call that stops the damage from spreading. We pull standing water out of carpet, subflooring, and crawl spaces, then dry the structure to IICRC standards. Homeowners in Downtown Medina and across King County call us because we show up fast, find the source, and leave the space dry and verified.
Live phone supportUpfront optionsBacked workmanship
What's included
What our water extraction service includes
Every water extraction job includes the core services below. If your loss requires additional work like mold remediation or structural repairs, we will scope that separately and walk you through it before any extra work begins.
Emergency dispatch and inspection
We dispatch a crew within minutes of your call and inspect the space with a moisture meter and thermal imaging camera to map where water traveled. You get a clear scope before we start.
Standing water removal
Submersible pumps and truck-mounted extraction units pull standing water from floors, carpet, and subflooring. We extract until the surface is dry to the touch, then check moisture readings below the surface.
Structural drying setup
We set air movers and dehumidifiers sized for the space, then monitor moisture readings daily with a hygrometer. Drying typically runs three to five days, and we adjust equipment as readings drop.
Antimicrobial application
After extraction, we apply antimicrobial solution to affected surfaces to prevent mold growth. This is standard on every job and is included in the scope, not an add-on.
Insurance documentation
We photograph the damage, log moisture readings, and prepare an Xactimate-formatted scope your adjuster can process. You get a copy of everything for your records.
Final moisture verification
On the last day, we take final readings and compare them to our baseline. If any area is still above dry standard, we keep drying at no extra equipment charge until it meets standard.
Service overview
What water extraction Medina WA really involves
Water extraction Medina WA is the mechanical removal of standing water from a structure using truck-mounted and portable extraction units, followed by structural drying. It is not a shop vac and a fan. We use a moisture meter and thermal imaging camera to map where water traveled behind drywall and under subflooring, then pull it out with high-capacity units before mold has a chance to colonize. Most residential jobs take two to four hours of extraction, then three to five days of monitored drying.
Medina sits between Lake Washington and the 405 corridor, so we see the same problems repeat: burst pipes after a hard freeze, water heater failure in older homes near Medina Square, and crawl space moisture that never fully dries out. If you search for water extraction near me in Medina WA at 2 a.m., you want a crew that knows these houses. We have been serving Medina since 2022, and we treat every call like the water is still rising.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
Our water extraction process
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency call
You call (833) 321-7153 and describe what happened. We ask about the source, the rooms affected, and whether the water is clean or contaminated. Within minutes we dispatch a crew with extraction units, moisture meters, and drying equipment loaded. Most Medina addresses see us on-site within 60 to 90 minutes.
Inspection and mapping
We walk the space with a thermal imaging camera and moisture meter to find where water traveled, not just where it pooled. That includes behind baseboards, under cabinets, and into adjacent rooms. You get a clear picture of the scope before we start pulling water.
Water extraction
Truck-mounted and portable extraction units pull standing water from carpet, padding, hardwood, and subflooring. For deep water, we use submersible pumps first. Extraction typically takes two to four hours on a standard residential job, longer if the water has spread across multiple levels.
Drying and monitoring
We set air movers and dehumidifiers to dry the structure, then check moisture readings daily with a hygrometer. Drying usually runs three to five days. We adjust equipment placement as readings drop, and we do not pull equipment until the structure meets dry standard.
Final verification
On the last day, we take final moisture readings and compare them to our baseline. You get a written summary with photos and readings you can hand to your insurance adjuster. If any area is still above dry standard, we keep drying at no extra equipment charge.
Tools & methods
Equipment and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Truck-mounted water extraction unit
Pulls large volumes of standing water from carpet, hardwood, and subflooring. Truck-mounted units are more powerful than portable extractors and cut extraction time significantly.
Moisture meter and hygrometer
Measures moisture content in drywall, wood, and concrete. We use readings to map the extent of water damage and track drying progress daily.
Thermal imaging camera
Reveals temperature differences behind walls and under floors, showing where water traveled even when the surface looks dry. Essential for finding hidden moisture.
Desiccant dehumidifier
Pulls moisture from the air in large volumes, especially in cool or below-grade spaces like basements and crawl spaces where standard dehumidifiers struggle.
Air mover
Circulates air across wet surfaces to speed evaporation. We position air movers based on moisture readings and adjust placement as drying progresses.
HEPA vacuum and air scrubber
Captures mold spores, dust, and debris from the air during remediation. We run HEPA filtration whenever mold is present or suspected.
Submersible pump
Removes deep standing water from basements and crawl spaces before extraction equipment can be used. Pumps handle several inches of water quickly.
Use cases
When to call for water extraction
These examples show how the service framework adapts rather than forcing every call through one repair.
Basement flood in Medina Heights
Three days of heavy rain overwhelmed the drainage and sent two inches of water into a finished basement. Carpet, padding, and the bottom two feet of drywall were soaked. The homeowner found it on a Sunday morning. → We pumped out the standing water, extracted from the carpet, and removed the wet drywall. Drying ran five days with desiccant dehumidifiers. Final readings confirmed the space was dry, and the homeowner scheduled repairs the following week.
Toilet overflow in Medina Square rental
A toilet supply line failed in a second-floor rental unit and ran for several hours before the tenant noticed. Water soaked the bathroom, hallway carpet, and the ceiling of the unit below. This was a Category 3 loss. → We contained the area, removed contaminated carpet and padding, extracted the water, and sanitized with antimicrobial solution. Drying ran four days. The property owner had a full Xactimate scope for the insurance claim and repairs started the following week.
Problems we solve
Water problems we solve in Medina
These are the calls we get most often from Medina homeowners. If your situation is not listed, call us anyway. We have seen it.
Burst pipe flooding a kitchen or bathroom
We shut off the water if it is still running, extract standing water from the floor and cabinets, and set drying equipment. Most burst pipe jobs are extracted within two to three hours.
Basement flooding after heavy rain
We pump out standing water, extract from concrete and any carpet, then set desiccant dehumidifiers sized for below-grade spaces. Basements typically dry in four to five days.
Water heater failure leaking into walls
We extract the water, open up wet wall cavities if needed, and dry the structure. We document the loss for insurance and coordinate with your plumber on tank replacement.
Sewage backup in a basement or laundry room
We suit up, contain the area, extract the water, remove contaminated materials, and sanitize with antimicrobial solution. Everything is documented for your insurance claim.
Pricing process
What water extraction costs in Medina
$450 - $6,000 depending on scope
Square footage affected
A single room costs less than a full floor. Extraction and drying equipment are priced by the area they cover, so a 200-square-foot bathroom runs significantly less than a 1,200-square-foot basement.
Water category
Clean water from a burst pipe is Category 1 and costs the least to remediate. Gray water from an appliance is Category 2. Sewage backup is Category 3 and requires PPE, containment, and disposal, which adds cost.
Drying time required
Most jobs dry in three to five days. If the structure is slow to dry because of dense materials or high humidity, equipment stays longer and the cost goes up. We monitor daily and adjust.
How much does water extraction cost in Medina WA?
Most residential water extraction jobs in Medina run $450 to $1,800 for extraction and initial drying setup, with total drying costs reaching $2,500 to $6,000 depending on square footage and how long drying takes. Clean water from a burst pipe costs less than contaminated water from a sewage backup. We provide a written scope before work begins, and we bill your insurance carrier directly when the loss is covered.
How long does water extraction take in Medina Washington?
Extraction itself usually takes two to four hours for a standard residential job. Structural drying after extraction runs three to five days, and we monitor moisture readings daily to confirm the space is dry. Larger jobs, like a flooded basement across multiple rooms, can take six to eight hours of extraction and up to a week of drying. We do not pull equipment until readings meet dry standard.
Do you offer 24 hour water extraction in Medina?
Yes. We answer the phone 24/7 and dispatch crews around the clock, including weekends and holidays. Most Medina addresses see us on-site within 60 to 90 minutes of the call. If you are searching for emergency water extraction near me Medina at 2 a.m., call (833) 321-7153 and a live dispatcher will get a crew moving.
Can you extract water from carpet in Medina WA?
Yes, and we save carpet more often than people expect. We use weighted extraction heads to pull water from carpet and padding, then set air movers to dry the fibers and subfloor. Carpet soaked with clean water from a burst pipe is often salvageable if we get to it within 24 to 48 hours. Carpet soaked with sewage backup water gets removed and disposed of per Washington State health regulations.
Related services
Related Services
flood restoration services
When storm water or a rising creek floods your Medina property, flood restoration picks up where extraction ends. We handle the full scope: water removal, structural drying, and repairs to drywall, insulation, and flooring.
emergency water removal
Emergency water removal is the first phase of any water loss. We pull standing water fast, then transition into extraction and drying. If you have water on the floor right now, this is the service to call.
mold remediation after water damage
If water sat for more than 48 hours, mold may already be growing behind drywall. We handle mold remediation after water damage with HEPA filtration, antimicrobial treatment, and containment to keep spores from spreading.Ready when you are
Call now for water extraction Medina WA
Water spreads fast, and every minute counts. We answer the phone 24/7 and dispatch crews within 60 to 90 minutes. Call (833) 321-7153 now and we will get the water out before it does more damage.
Talk with the local team
Request water extraction
Call us at (833) 321-7153 any time, day or night. We answer 24/7 and dispatch a crew with extraction units and drying equipment ready to run. If you are in Medina or the surrounding King County area, we can be on site the same day. Email works too, but for emergencies, call.